Product manual

How to add the language layout on my keyboard?

1. Open Settings: Click on the Start menu, then select the "Settings" gear icon. Alternatively, you can press Win + I on your keyboard to open Settings directly.
Navigate to Time & Language: In the Settings menu, click on “Time & language.”
2. Select Language & region: On the sidebar, click on “Language & region.” Here you'll see the languages currently installed.
3. Add a Language: If the language you would like to add is not already listed:
Click on “Add a language.”

4. Search for and select the language you want. then, click "Next" and then "Install" to add the language pack.

5. Configure Keyboard Layout: Once the language is added, click on the three dots (…) next to it under the “Preferred languages” section.
6. Select “Language options.” Then, Under “Keyboards,” click “Add a keyboard” and select the keyboard layout you prefer.

7. Switch Between Keyboard Layouts: You can switch between keyboard layouts by clicking on the language icon in the taskbar (near the clock) or by using the shortcut Win + Space to cycle through the available keyboard layouts.

PERIBOARD-317 RGB won’t type after computer restart, what shall I do?

1. Test on Another Computer: To identify the problem, try connecting the PERIBOARD-317 RGB to another computer. This step is crucial as it helps isolate the issue. If the keyboard works fine on another system or computer, the problem might be with your original computer's hardware or software configurations. However, if it doesn't work on any computer, the keyboard itself might be faulty.

2. Direct Connection to Computer Ports: Often, issues with USB devices can stem from unstable connections, especially when using USB hubs or extension cables. Disconnect the PERIBOARD-317 RGB from any USB hubs or extension cables. Connect it directly to one of your computer's USB ports. Preferably, use a USB port on the back of a desktop computer, as these ports are directly connected to the motherboard and usually provide a more stable connection than front-side ports or ports on laptops.

3. Check and Update Drivers: Remove any previously installed keyboard drivers, then restart your computer. This can resolve conflicts between the keyboard software and your system. For this process, go to device manager and check the driver in Keyboards

Select “Scan for hardware changes. This will allow your operating system to refresh the new hardware for plug and play.

After refreshing the hardware list, please select “Update driver’ to check the any updates.

Select the option “Search automatically for driver” check driver to update or reinstall for your operating system. After your operating system confirms to reinstall the driver, your device's driver is reinstalled and ready to use.

4. Contact Customer Support: If, after following all the above steps, your PERIBOARD-317 RGB still doesn't work, it's time to seek further assistance. Reach out to for personalized troubleshooting and potential repair or replacement options. Visit the official website and navigate to the support section to find contact information or a support request form. Provide a detailed description of the issue and the steps you've already taken to try to resolve it.

How can I address issues like double letters on PERIBOARD-317 RGB keyboard?

To address issues like double letters on your keyboard, you can try the following steps:

Open Settings: Click on the Start menu, then select the "Settings" gear icon. Alternatively, you can press Win + I on your keyboard to open Settings directly.
Navigate to Ease of Access: In the Settings menu, click on “Ease of Access.”
Scroll down the left side to find the "Keyboard" from "Interaction" section in "Ease of Access."
Please turn on "Ignore brief or repeated keystrokes and change keyboard repeat rates" on "Use Filter Keys" section in Keyboard.

Test the keyboard to see if the issue is resolved. If not, you can try cleaning the keys.

How to clean a Key on your keyboard?

Unplug or turn off the keyboard.
Identify the key causing the issue (e.g., the 'Y' key), then gently pry up the key using a small, flat instrument (flat-head screwdriver) or your nail. Insert the tool or your nail under the edge of the keycap and carefully lift it up. Be gentle to avoid damaging the keycap or the switch.
Use the swab to clean any sticky areas on and around the key switch. Make sure to clean the underside of the keycap as well. If there is visible debris, use a dry cotton swab or compressed air to remove it before using the alcohol.
Reinsert the key back into its original place by gently pressing it down until it snaps back into place.
Check the keys to see if the issue is resolved.

How to Fix Sticky or Removing and Attaching Keyboard Space Bar

Does the PERIBOARD-317 RGB's backlit turn off when the computer is off?

Yes, if the keyboard is connected via USB to the computer. It stays on if connected to a wall outlet adapter.
Backlight can also be toggled with Scroll Lock key {ScrLK}

After turn off Scroll Lock (Backlight), but PERIBOARD-317 RGB turn back on after 20 minutes. Why?

It could relate to your computer's sleep settings.
Please open "Power & Sleep Settings" and adjust the time frame for "sleep" to never. You can leave "screen" as it is.

How to Turn Off PERIBOARD-317 RGB Backlighting When It Stays On After the PC is Powered Off (Windows 11):

Can I adjust volume with PERIBOARD-317 RGB on Windows 10?

Unfortunately this Keyboard does not have the function to be able to control volume.
You can do that directly on your OS, at the bottom right of your screen.

Backlit of PERIBOARD-317 RGB flickers during use, what shall I do?

Test the device on another Windows computer to check for the issue.
Ensure proper device connection, use computer USB 2.0 ports instead of hubs or adapters.

How to Use the Fn-Lock Key for Multimedia keys?

The Fn-Lock key toggles between multimedia functions and standard function key (F1-F12) functions on your keyboard. When activated, it enables multimedia actions like adjusting brightness. When deactivated, it restores the traditional F1 to F12 functions.

Press the "Fn + Fn Lock" key then Fn Lock is on:

How to change the light of keyboard?

To change the lighting of your keyboard based on the image, follow these steps

Turn on/off the keyboard backlight:

Press the lightbulb icon key to toggle the backlight on or off.

Change the lighting mode (patterns):

Hold the Fn key and press one of the following number keys (listed below) to cycle through different lighting patterns:Fn + 1: Rainbow Flowing Light (Default)
Fn + 2: Rainbow Marquee
Fn + 3: Rainbow Back and Forth
Fn + 4: Rainbow Steady
Fn + 5: Rainbow Breathing
Fn + 6: Spectrum Cycle
Fn + 7: Color Blending
Fn + 8: Ripple Effect
Fn + 9: Custom

Adjust color in custom modes:

For modes that allow color adjustment (marked with an asterisk), use the following:
Fn + ↑/↓: Adjust the seven colors (Red, Green, Blue, Yellow, Violet, Turquoise, White).

Increase or decrease lighting frequency:

Fn + +: Increase lighting frequency (Fast/Medium/Slow).
Fn + -: Decrease lighting frequency (Fast/Medium/Slow).

Adjust color for different lighting zones:

Press Fn + [lightbulb icon key] to switch between lighting zones, and adjust colors for each lighting zone with Fn + ↑/↓.

Change the marquee lighting direction:

Fn + ←: Change marquee direction to the left.
Fn + →: Change marquee direction to the right.

Reset to factory lighting settings:

Hold Fn + Esc for 3 seconds to reset to the default "Rainbow Flowing Light" pattern